If you want to purchase a large quantity of caged needle bearings K25X30X17, it is advisable to buy directly from a qualified manufacturer that can provide you with evidence of its materials, quality system, and delivery schedule. Authorised distributors and online suppliers may assist with smaller or more urgent purchases, but you need to be extremely cautious to ensure traceability and technical data. We offer these bearings at ATLYC (Luoyang Auto Bearing Co., Ltd.), constructed of GCr15 bearing steel and steel stamping cages or PA66 cages. We also provide OEM customisation, sample service, and 7-day delivery. This tutorial shows you what to check for when making a major order.

The K25X30X17 bearing has an interior diameter of 25mm, an outer diameter of 30 mm, and is 17mm wide. This is a radial needle roller and cage assembly. There are no rings built in; the shaft and housing bore are the raceways. Just looking at the part number is not enough. I always have purchasers verify the clearance, cage material, tolerances, and any suffix before they sign off on a design. ISO 3030 sets a standard for boundary dimensions and tolerances for this kind of bearing when you compare bids. The information on our caged needle bearings K25X30X17 is displayed in Table 1.
| Item | Detail |
|---|---|
| Size | 25 mm bore × 30 mm outside diameter × 17 mm width |
| Material | GCr15 bearing steel |
| Cage | Steel stamped or PA66 |
| Main applications | Gearboxes and motorcycle engines |
| Delivery time | 7 working days |
| OEM customization | Supported |
| Samples | Sample service available |
Each needle roller is held at a steady distance by the cage. This way, the rollers never touch. That cuts down on heat and friction, and the rollers carry the load directly between the shaft and the housing. Sorted rollers keep the difference in diameter to less than 2 µm. This spreads the load out evenly and lowers the stress on the surfaces that touch. This thin design is stiffer per unit of space than a ball bearing. You can find caged needle bearings K25X30X17 in gearboxes. These are good for idler gears and planetary gear sets, where they handle the shift loads. These are found at the ends of connecting rods in motorcycle engines. They can handle fast acceleration and oscillation while being oiled with splashes.
Service life isn't just based on size; it's also based on how the system is actually used. ISO 281 tells us how to figure out rated life from basic load ratings. For shock or oscillating loads, static ratings are important. Don't trust general numbers; instead, look at the datasheet and ask for the load ratings. Check the shaft before you figure out what size caged needle bearings K25X30X17 you need for the job. The surface of the shaft should be at least 0.2 µm thick and have an HRC of 58–64. Any h6 shaft with an h7 housing bore will have the same C0 radial clearance. Lubrication can also change the speed limits. Full speed can be reached with oil mist or splash lubrication, but the limit can be slowed down by 30–40% when grease is used because it keeps heat in the cage. Because of contamination, vibration, and impact, a test may be needed before production can start.
Caged needle bearings K25X30X17 should not be compared to drawn-cup bearings like the HK series or full-complement designs. Drawn-cup types fit into a housing easily and press into it. A hardened shaft can be used as the inner raceway of a caged assembly, which guides the rollers better and can handle higher speeds. Full-complement designs have more rollers, so they can carry more weight at low speeds. However, they generate more heat and friction. Steel cages can handle up to 120 °C and strong chemicals. When used at high speeds, PA66 cages are lighter and quieter. See if the alternative from INA, SKF, or FAG is the same. Compare the whole drawing, not just the three dimensions. Now that you understand the technical side, you need to decide where to buy.
Write down first what you are going to use it for, how often you will use it each year, the load, speed, temperature, lubrication technique, and shaft and housing information. Then list the specifications that cannot be modified, such as the size, clearance, cage type, tolerances, packing, and quality certifications. I check the files of providers of caged needle bearings K25X30X17 for ISO 9001 and IATF 16949 seals. The first standard is about quality management generally. The second standard is regarding supply networks for autos. Also check traceability, inspection records, and experience with the OEM. Measure samples with calibrated instruments and check that the rotation, surface quality, and documentation are accurate before you place a big order. Then, write an agreement that contains detailed instructions, notification of modifications, batch consistency, and claims handling. In this manner, subsequent orders will be consistent with the authorised sample.
You have four major avenues open to you. Direct manufacturers will tell you what they can build, maintain specs current, and provide technical assistance for OEM projects that need to be built in volume. Authorised distributors hold stock locally and sell smaller quantities, but you need to make sure the items can be monitored. You still need to examine the stock status and technical data. You may use online suppliers to assist you in refilling rapidly and check pricing. The custom manufacturers are required to provide feasibility assessments and sample clearance for unique demands. Table 2 compares these channels for consumers who wish to acquire caged needle bearings K25X30X17.
| Channel | Best for | Check first |
|---|---|---|
| Direct manufacturer | High-volume OEM programs | Capacity, certificates, sample approval |
| Authorized distributor | Local stock, smaller lots | Traceability, batch records |
| Online supplier | Urgent replenishment | Real stock status, datasheet accuracy |
| Custom producer | Special clearance, materials, labels | Feasibility study, drawings |
Most of the time, the lowest unit price does not mean the lowest total cost. Brand, origin, product code, material, clearance, inspection level, packaging, and documents are some of the things that you can compare line by line in the quotes. The price can change based on the number of orders, the annual forecast, special tolerances, and certification. Check that the trade term, like EXW, FOB, CIF, or DAP, is correct according to Incoterms 2020. Then add warehousing, insurance, customs fees, and handling in your own country. When a supplier quotes caged needle bearings K25X30X17 in GCr15 steel with a 7-working-day delivery time and sample service, you have a good idea of how their terms compare to others. Before you approve, make sure you know how much is in stock, how long it will take to make, how to file a claim, and how long the price is good for your whole order.
Sort ready stock from reserved inventory and planned production, and ask for a written schedule of when shipments will happen in full and in parts. Use the production lead time, the risk of transport, and how important the equipment is to set the safety stock. If you order caged needle bearings K25X30X17 to be sent abroad, the packaging should keep them safe from water, dust, impact, vibration, and corrosion while they are being shipped and stored in a warehouse. Each box should have the part number, batch number, quantity, and place of origin written on it. Before sending the goods out, agree on the commercial invoice, packing list, certificate of origin, and inspection reports. In the United States, these papers help customs and receiving teams check each shipment.
Most people make the mistake of taking the part number to be a full specification. A 25 × 30 × 17 mm size doesn't tell you anything about the tolerance, clearance, cage material, or load rating. Some other mistakes people make are picking based only on price, thinking that brands are interchangeable, not caring about the quality of the shaft raceway, and placing large orders without first approving a sample. To avoid these problems, make sure you get full drawings and technical data, compare the total landed cost, and get written confirmation that the substitute is the same before you accept it. Keep the batch records and reference samples that you have saved. ISO 15243 groups different types of bearing damage into groups. Batch records help you connect a pattern of failure to its cause without having to check the whole supply.
When it gets there, check the part number, quantity, packaging, batch label, certificates, and condition that can be seen. Check the 25 mm bore, 30 mm outside diameter, and 17 mm width with tools that have been calibrated. You can feel roughness or hear noise by turning the bearing by hand. Rolling elements need to be HRC 60–64 hard, and the company that sells them should explain how they check this. Clean the shaft, the housing, the tools, and the work area before going in. Be careful not to hit the cage or rollers when you press the bearing in. After installation, check the temperature, vibration, noise, and how the lubricant acts. You can link maintenance records to batch numbers so that you can figure out what went wrong and how it was working.
In 2010, Luoyang Auto Bearing Co., Ltd. began with a single fully automated deep groove ball bearing workshop. Over 15 years, we grew to have six workshops that work on six main types of bearings. There are 120 skilled workers here who do everything from production to quality control to research and development to assembly. That's why our ISO 9001 and IATF 16949 certifications matter to buyers in the auto and industrial sectors who check out their suppliers. We have customers in South Korea, the US, Germany, Russia, Iran, and Turkey, so we know how to handle export paperwork and set up long-term supply plans for caged needle bearings K25X30X17 and other types of bearings.
When you purchase our caged needle bearings K25X30X17, you get a steel stamping or PA66 cage. So you may choose the one that meets your temperature and speed requirements. They work on motorbike engines and transmissions. We provide OEM customisation; simply submit us your design and specifications, our experts will check the feasibility. We can also provide samples for you to evaluate the fit and performance before we create a lot of them. Delivery takes 7 business days. This plan allows distributors a regular supply of parts for restocking, and it gives OEM engineers a product to test before they commit to volume.
There are three things to do before you issue a purchase order. For the technical inspection, be sure to know: dimensions 25 x 30 x 17 mm, speed and load required, clearance, temperature range, lubrication, shaft and housing conditions and any other acceptable equivalents. As part of the supplier verification, the company’s identification, certifications, drawings, data sheets, samples, traceability, capacity and ability to place repeat orders should be checked. Write down the minimum order quantity (MOQ), tiered price, lead time, Incoterms, who pays for freight, packing, labelling, warranty, and how to manage nonconformance for the commercial check. This list should be available to your buying and incoming inspection teams so they may use it as a reference when a fresh batch of caged needle bearings K25X30X17 comes in.

When buying a large number of caged needle bearings K25X30X17, it is better to carry out both technical and business examination at the same time. There are several sizes other than 25 × 30 × 17 mm. The factors that affect the performance of a bearing in gearboxes or motorcycle engines include clearance, cage type, shaft hardness, lubrication, and load ratings. If you examine a standard equivalency next to drawn-cup and full-complement designs, you can tell it requires a comprehensive drawing revision. Different kinds of orders may be completed by direct manufacturers, wholesalers, internet providers and bespoke producers. The overall landed cost is of higher importance than the unit price. Samples are authorised; entering inspections are done . . . you can follow batches. Installation is done properly, so nonconformance is less likely to happen.” Buyers may be confident in the quality of a long-term supply with ISO 9001 and IATF 16949 certification.
No, because the rollers run directly on the shaft, it needs to be HRC 58–64 hard and have a Ra of 0.2 µm or less. It wears out faster on a softer shaft.
No, it's just a radial bearing. For axial positioning, you should use thrust washers or thrust bearings.
Pick steel if the temperature is above 120 °C or if the chemicals are harsh. Pick PA66 if you want less weight, quieter running, and fast acceleration.
To keep the standard C0 radial clearance, an H6 shaft and an H7 housing bore are used.
Yes. ATLYC lets you order samples so you can make sure the fit is right before ordering a lot of them. It takes 7 business days for us to deliver.
Are you ready to buy a lot? ATLYC makes caged needle bearings K25X30X17 and is certified by ISO 9001 and IATF 16949. They use GCr15 steel, steel, or PA66 cages and offer OEM customization, sample service, and delivery in 7 working days. Send your drawing, quantity, and application to auto@lyautobearing.com. Someone from our team will get back to you with a quote. For more information on the product, go to https://aotezhoucheng.aixdb.cn/.
1. ISO 3030, Rolling Bearings: Radial Needle Roller and Cage Assemblies, Boundary Dimensions and Tolerances, 1996
2. ISO 15243, Rolling Bearings: Damage and Failures, Terms, Characteristics and Causes, 2017
3. IATF 16949, Quality Management System Requirements for Automotive Production and Relevant Service Parts Organizations, 2016
4. ISO 9001, Quality Management Systems: Requirements, 2015
5. Incoterms 2020, International Chamber of Commerce, 2019
6. Harris, T. A., and Kotzalas, M. N., Essential Concepts of Bearing Technology (Rolling Bearing Analysis, 5th Edition), CRC Press, 2006
Learn about our latest products and discounts through SMS or email